OUR PRODUCTS
Water Wending Machine
Type –
A. Coin Type, Card Type & Coin + Card
B. Single Tap, Double Tap & Multiple Tap
MAKE – Infinity & Initiative
Sand Media
TYPE – River Sand & Marble
SIZE – 2×4, 4×8, 12×16, 8×16, 30×80, 12×20, 6×12, 25×40, 3×6
Pressure control switch
TYPE – Low Pressure & High-Pressure Switches
MAKE – Danfoss & Indfoss
Pressure Gauges
TYPE – Inline & Panel Mount (Glycerine and without Glycerine)
DIAL SIZES – 2.5 Inch, 4 Inch & 6 Inch
MOC – SS & MS
MAKE – Arbuda, Boumer and Pointer
Online PH Meter
RESOLUTION – 9.766 µV
ACCURACY – -2% to +2%
RELAY – 10A/230V
TRIPPING – NO / NC Settable
MAKE – Infinity
Multiport Valves
SIZE – 20nb, 25nb, 40nb, 50nb and 65nb
TYPE –
A) Top Mount and Side Mount
B) Filter and Softener
MAKE – Flow care and Initiative
Multi Cartidge Filter Housing
CARTRIDGE SIZE – 2.5″x30 and 2.5″x40″
ROUND – 5, 7, 9 and 11
MOC – UPVC and SS
FRP Vessels
SIZES – 8×35, 8×44, 10×54, 13×54, 14×65, 16×65, 18×65, 21×62, 24×72, 30×72, 36×72, 42×72 and 48×72
MAKE – Starlite and Pentair
MOC – FRP, SS and MS
Flow Meter or Rotameter
SIZE – 500lph to 90,000lph
CONNECTION – 1/2″ to 3″
MAKE – CWC and Aster
float Switch
- Available in 6A, 10A and 16A
- Available in 2mtr, 3mtr and 5mtr wire size
- High Accuracy and long life
Distribution System
TYPE – Single Strainer and Multi-Strainer
– Easy To Install
– Compatible with all Pressure Vessel
– Corrosion Resistance
Diffuser
SIZES (In mm) – 63×650, 63×1000, 90×1000 and 90×2000
MOC – EPDM and Silicon
TYPE – Bubble Type & Disk Type
Control Panel
- Online TDS/Cond., Ampere, Voltage, Plant Hours, Auto Flushing, Pump Dry Run, Phase Prevention.
- All types of auto MPV supported
- Ampere, Voltage, level/Pressure Protection
Cartridge Housing
SIZE – 2.5″x20″, 4.5″x10″ and 4.5″x20″
CONNECTION – 1/2″, 3/4″, 1″ and 2″
MOC – PP and SS
Bag Filter Housing
SIZES – 4.5″x20″ and 7″x32″ (Single, Double and Triple bag)
MOC – PP, UPVC and SS
Activated Carbon Media
- Available in all sizes
- Wide IV range available with best rates
- Iodine value Assurance
MS Vessels
- Available in multiple sizes as per customer requirement
- Easy design and good finishing
- FRP and Rubber lining Coating
Membrane Housing
SIZES –
– In 4″ from 1 element to 4 element
– In 8″ from 1 element to 6 element
MOC – FRP and SS
TYPE – End Port and Side Port
RO And UF Membrane
- Good TDS reduction ratio upto 99.9%
- Available in 4″x40″ and 8″x40″ sizes.
- Available in different makes.
FAB Media
SIZES –
– In 4″ from 1 element to 4 element
– In 8″ from 1 element to 6 element
MOC – FRP and SS
TYPE – End Port and Side Port
Filter Press
- Good TDS reduction ratio upto 99.9%
- Available in 4″x40″ and 8″x40″ sizes.
- Available in different makes.